Hydraulic Platform Lift Singapore

Both hydraulic and traction lifts serve good purpose. Below are some pointers to help in your decision making process.

HYDRAULIC

  • A system that allows for most flexibility in design and aesthetics.
  • Single set of guide rails mean quick installation and simple driving mechanism.
  • Using power of hydraulic fluids, suspended load can be increased for bespoke finishes.
  • VVVF inclusion allow for reduced noise, smooth, frequent and consistent ride travel.

TRACTION

  • A system that allows for high speed travel, without the need for high power.
  • Gearless motors mean smooth and frequent travel whenever needed.
  • Machine room-less doesn't take up any space surrounding the shaft.
  • Cantilevered frames make for a flexible design for complex situations.

Easy

HY

HYDRAULIC LIFT / TECHNICAL DETAILS

Compliance Standard European Machinery Directive 2006/42/EC and European Normative EN81-41
Rated load up to (kg) 400 (500*)
Max travel (m) 13.4 (16.9*)
Max number of stops 8
Speed m/s 0.15 (0.25**)
Entrances 1, 2
Landing doors Automatic side opening or manual swing
Cabin doors Automatic sliding, no door
Door opening (mm) 500 – 1200
Control Automatic pushbutton at landings, automatic pushbutton or hold to run from the cabin
Power Supply 220 Volts single phase /50Hz
Machinery Indirect acting piston
Drive system 2 speeds or VVVF
Controller In a cabinet
Std distance between guide brackets (mm) 1500
Frame Rucksack
Cabin height (mm) 2000 – 2300
Pit Depth (mm) 300
Std / Min headroom (mm) 2300 – 2700

* upon custom request,
** maximum system designed speed

HY • NO CABIN DOORS

All dimensions in mm

CW Cabin width
CD Cabin depth
DO Door opening
SW Shaft width
SD Shaft depth

HY • AUTOMATIC DOORS 2 PANELS

All dimensions in mm

CW Cabin width
CD Cabin depth
DO Door opening
SW Shaft width
SD Shaft depth

Easy

TR

GEARLESS TRACTION LIFT / TECHNICAL DETAILS

Compliance Standard European Machinery Directive 2006/42/EC and European Normative EN81-41
Rated load up to (kg) 400
Max travel (m) 22
Max number of stops 8
Speed m/s 0.15 (0.30*)
Entrances 1, 2
Landing doors Automatic side opening or manual swing
Cabin doors Automatic sliding, no door
Door opening (mm) 500 – 1200
Control Automatic pushbutton at landings, automatic pushbutton or hold to run from the cabin
Power Supply 220 Volts single phase /50Hz
Machinery 2:1 ratio Gearless
Drive system VVVF
Controller Embedded in the shaft and in a console on the door frame
Std distance between guide brackets (mm) 1500
Frame Rucksack
Cabin height (mm) 2000 – 2300
Pit Depth (mm) 350
Std / Min headroom (mm) 2500 – 2900

* upon custom request,
** maximum system designed speed

TR • NO CABIN DOORS

All dimensions in mm

CW Cabin width
CD Cabin depth
DO Door opening
SW Shaft width
SD Shaft depth

TR • AUTOMATIC DOORS 2 PANELS

All dimensions in mm

CW Cabin width
CD Cabin depth
DO Door opening
SW Shaft width
SD Shaft depth

Standard Options & Finishes

CABINS

Laminate

Stainless Steel

Colored Glass

Panoramic Glass

WALLS

It is possible to customize walls, door side wall, uprights, ceiling, control panel, landing doors and car door. In case of panoramic solutions, materials used for the interior walls can be applied on request also outside the car.

Laminate

Stainless Steel

Coated steel

Glass

FLOORS

Anti-Slip Vinyl

Compressed Granite

Natural Granite

COMPLEMENTS

Ceiling

LED Spotlights

LED Panel

Straight on wall handrail full length

Brushed or shiny stainless steel.

Curved on wall handrail

Brushed stainless steel length.

Straight handrail over COP

Brushed or shiny stainless steel.

Curved handrail over COP

Brushed or shiny stainless steel.

CUSTOMIZATION

Vertical car operating panel

Dot matrix position indicators

TFT position indicator

Pushbuttons

Landing position indicator

Landing operating panels

Manual swing landing doors

Steel

  • Anti-rust paint color RAL 7032 (standard);
  • RAL paint in a choice of colours;
  • Stainless steel cladding on landing side;
  • Stainless steel cladding on both sides;
  • Wood cladding (landing side or both sides);
  • Fire-rated doors according to EN81-58: EI 120 (C1 only).

Anodized aluminium with glass panel

Door Glass Panel:

  • Clear
  • Coloured (smoked, grey, bronze)
  • Configuration for 4+4+0.76 pane

Door Jamb and Frame:

  • RAL paint finish in a choice of colours
  • Anodised aluminium

Steel jamb and full glass door panel

Door Glass Panel:

  • Clear
  • Stopsol bronze
  • Etched

Door Jamb and Frame:

  • RAL paint finish in a choice of colours
  • Stainless steel cladding brushed finish
  • Stainless steel cladding shiny finish

Automatic side-opening doors

2 panels with side opening

Door Opening (mm):
600 – 650 – 700 – 750 – 800 – 850 – 900

3 panels with side opening

Door Opening (mm):
600 – 650 – 700 – 750 – 800 – 850 – 900 – 950 – 1000 – 1050

FINISHINGS

  • Anti-rust paint RAL 7032 (standard)
  • RAL paint, colour on request
  • Skinplate and stainless steel

Glass framed door

Dimensions on request

Clear glass (standard) or colours on request

Door frame finishes:

  • Anti-rust paint RAL 7032 (standard) or colour on request
  • Stainless steel

Full glass panel

Dimensions on request

Clear glass (standard) or colours on request

Door frame and lower guide finishings:

  • Anti-rust paint RAL 7032 (standard) or colour on request
  • Stainless steel